South Bend Clutch Kits for 1992-1993 Acura Integra 1.7L and 1.8L GSR
This single disk clutch package is designed for high horsepower vehicles desiring a soft pedal feel using a modified pressure plate (SS-Series ~2200# clamp force) and SFI approved with significant load increase over typical stage 1,2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. The sprung centers on the disc in conjunction with the marcel fin between the linings create a dual dampening effect that gives great clutch modulation for easy street driving on the full face sprung hub clutch disk offerings. The clutch material offerings are listed below for descriptions to each choice.
Options in Drop Down Menu:
*Full Street – SS-Series Pressure Plate with TZ-Series Full Face, Sprung Hub Kevlar Clutch Disk Kit (Up To 325HP)
*Street/Strip – SS-Series Pressure Plate with TZ/B-Series Dual Friction, Full Face, Sprung Hub Kevlar/Ceramic Clutch Disk Kit (Up To 350HP)
*Street/Strip HD – SS-Series Pressure Plate with B-Series Full Face, Sprung Hub, Segmented Friction Ceramic Clutch Disk Kit (Up To 400HP)
*DRAG 6-Puck – SS-Series Pressure Plate with FE-Series 6-Puck, Sprung Hub Feramic (Sintered Iron) Clutch Disk Kit (400+ HP)
*Extreme Ceramic – SSX-Series Pressure Plate with B-Series 6-Puck, Sprung Hub Ceramic Clutch Disk Kit (400+ HP)
PRESSURE PLATE OPTIONS:
SS-Series pressure plates are ~2200# clamping force
SSX Series pressure plates are ~2700# clamping force.
CLUTCH DISK OPTIONS:
TZ-Series clutch disk is a full face, sprung hub Kevlar friction material used on both sides.
TZ/B-Series clutch disk is a dual friction, full face, sprung hub Kevlar on pressure plate side/Ceramic on flywheel side.
B-Series clutch disk is a full face, sprung hub, segmented Ceramic friction material used on both sides.
DXDF-Series clutch disk is a 6-puck, sprung hub Feramic (sintered iron) material used on both sides.
SSX-B Series clutch disk is a 6-puck, sprung hub Ceramic material used on both sides. SSX-B kits can also be requested as a full-face clutch disk instead of a 6-puck disk for maximum streetability with the highest clamping load pressure plate.
Clutch Model Prefix: K08028
Fitment: 1992-1993 1.7L and 1.8L GSR Acura Integra