Injector Dynamics 2000cc High-Z Fuel Injectors (x4) for DSM / Evo 8/9



Product Description

Part Number: 2000.60.11.D.4

Plug and Play injectors with Denso-to-EV1 Adapters (90.5), you need to purchase the injector resistor pack delete plug separately to complete installation.

The ID2000 has set the standard for linearity and control in a large injector. Flowing in excess of 2000cc/min at 3 bar, the ID2000 will also provide a smooth stoichiometric idle on E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm.
With a pressure capability of 9 bar this injector can flow as much as 3700cc/min with excellent low pulsewidth linearity, and has the broadest operating range of any injector on the market.

Basic Specifications

Nominal Flow Rate – 2225cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi)
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane.
Electrical Connector – Denso

Additional information

Weight 3 lbs
Dimensions 8 × 6 × 4 in
Add PnP Adapters?

Yes (+$48.00) Add Denso-to-EV1 Adapters (x4) 90.5, No


There are no reviews yet.

Be the first to review “Injector Dynamics 2000cc High-Z Fuel Injectors (x4) for DSM / Evo 8/9”

Your email address will not be published.

You may also like…

  • Injector Dynamics 2000cc Injector Denso-to-EV1 Adapter Harnesses 90.5 (each)